Processing of inner holes

scope of application

Any form of work piece self-located by artifact shape features.

The dressing run-out

10 Seconds

Single piece total run-out

Product cutting time + 10 seconds

Storage drive mode

Standard cylinder drive

location mode

Secondary positioning device positioning

Workpiece positioning accuracy

±0.03

Control system

Domestic/Wistron/Import/ Hust

Workpiece tray

Material: aluminum plate, specification: 660 * 340 * 15, quantity: 2 pieces

Product replacement needs to change the part

Panel and paw

Characteristic

Six-axis robot + CNC lathe + dot matrix bin, adapt to the product needs to have a certain batch, can one sequence two sequence automatic turn wire processing.

Electrical conditions are required

Power supply: 3-phase four-wire 380V; voltage fluctuation range: ± 10%; frequency: 50 HZ;

Gas source is required: 0.6 Mpa.

On-site environmental requirements

Ambient temperature: -10~50°C; relative humidity: 20%~75%; vibration: vibration acceleration <0.5g; electrical cabinet must be grounded, grounding resistance<1; no corrosive gases at the work site; workshop foundation: conventional cement floor treatment.